For those serious rust problem areas

For really tough jobs where you need the ultimate in protection against rust, use CorrosionX Heavy Duty. It is a high performance, thick film version of CorrosionX. It forms a dripless, non-hardening coating that resists removal by splash or spray - including complete immersion in saltwater. It seals out moisture while stopping the corrosive electrolite action. Its non-hardening, will not stiffen or crack under stress, it bends as the surface flexes or twists.
It last a long time but it will eventually erode away. It will be there long after other products have long since hit the ‘skids’. While it is there, it will protect your equipment better than any other product I have used.

I have used the HD on my trailer parts. I sprayed the springs before I installed them. The last time I checked, the little metal band, silvery in color that usually rusts off after the first month of use, was still there and still shiny! Great stuff!

A great treatment for all guns

Packaged in a 4 oz. applicator bottle, CX for Guns cuts through stubborn bore residue, decreases fouling and increasing muzzle velocity. A light coating all over the gun will protect the surface from all forms of corrosion.

Because this product bonds to the metal of the gun, it will not sling off when used in semi or fully automatic weapons. It provides excellent protection for those collectible and antique guns. Swap a dirty bore with CX for Guns and it will work its way through fouling to reach the metal, lifting lead, copper and powder residue out of ‘pores’ for easy removal with a patch.

Competitive .22 caliber shooters report that after cleaning their guns with CX for Guns, their time between jams went fro 200-300 to over 1,500 rounds or more.

Smooth your reel opertion with ReelX

Another great product! Packaged in a convenient dispenser bottle with a long thin neck that allows you to reach into those hard-to-get-to places, this is to reels what icing is to cake; it makes all worth it. Clean your reel completely - - do a complete disassembly of your reel and remove all traces of the old lubricants. Then, and only then, apply a small amount of ReelX into the gears. It will run smoother and quieter than you have ever had your reel do before.

Why? Because of the same basic technology of all the other products except for one big plus. When you put the reel to work and you start winding in the 25 pound snapper the gears heat up from pressure. When that happens the ReelX forms a chemical bond to the exposed metal parts. This surface runs up to 4 times smoother than any teflon coated surface.

When you are done 'ReelX'ing your reel, put a small amount of a rag and wipe the exterior of the reel. It will keep it looking fresh and new.


These and other Corrosion Technology products will be available at discount rates to the Premium Members in the DBS Ships Store.

Guarantee: If you are not convinced that it does everythingwe say, we'll give you your money back. No IFS, ANDS or BUTS.

© Copyright 2003 by Deep-Blue-Sea.org

Top of Page